Pagina 1 di 2

[GROUP BUY] Swing arm bearings/seals/pins KIT (with tools)

Inviato: mercoledì 12 dicembre 2012, 9:07
da brucaliffo
AOTR proudly presents the swing arm bearings/seals/pins kit (with tools):

Immagine
Immagine

for 88€ plus shipping cost you get:
  • 7 DL1816 bearings (number 2 in above picture)
  • 8 seals with rubber covered external lip (1)
  • 4 pins in tempered ground steel (3, 4, 5)
  • tools to insert and extract bearings
  • grease

(if the total weight will be less than 2kg, shipping will cost 15€ for Europe, 25€ US and 30€ Australia)
Estimated dispatch time: middle/end of jan 2013.
Be quick to join if you are interested, as this group buy will close by 30 nov 2012.

Disclaimer:
All this material has been tested for over 3 years by many AOTR users without problems. I will install it myself on my bike.
Nevertheless, I want to clarify that I do not take any responsibility neither for pins nor for bearings and tools provided.
Who decides to buy any component offered here and to mount it does so at his own risk lifting me and AOTR from any responsibility.

In AOTR we are neither professionals nor merchants, we do this out of profit mainly because we are so pissed off with Aprilia and its high spare part prices :evil:

Participants:

Codice: Seleziona tutto

01) moto-abruzzo......IT.......96€......PAID
02) Calbo.............IT.......96€......PAID
03) Stanleybobly......NL......103€......PAID
04) lummelke..........BE......103€......PAID
05) GRUMPYGIT.........UK......103€......PAID
06) blumeeni..........UK......103€......PAID
07) nerald............UK......103€......PAID
08) haga lout.........UK......103€......PAID
09) timcrasher........UK......103€......PAID
10) adrianh...........UK......103€......PAID
11) pugwash...........UK......103€......PAID
12) BigSteve..........UK......103€......PAID
13) mike081...........UK......103€......PAID
14) the_toe_cutter....IE......103€......PAID
15) Refotsirk.........SE......103€......PAID
16) Tomintoul.........DE......103€......PAID
17) Matt fe2o3 .......US......113€......PAID
18) ELMOSISU..........US......113€......PAID
19) Capsil21..........US......113€......PAID
20) JohnG.............AU......118€......PAID
More info in italian: http://www.apriliaontheroad.com/foru...p?f=15&t=31858
Mounting instructions pdf here (in italian, but with a lot of pictures)
Immagine

Re: [GROUP BUY] Swing arm bearings/seals/pins KIT (with tools)

Inviato: mercoledì 12 dicembre 2012, 9:40
da brucaliffo
Ok guys, we are free to go on here with no fear of censorship :roll: :giullare:
In this thread I will post any update on the status of the group buy.

I have all your email and address details and I received all the payments, so please don't worry, at the end you'll have your kits (isn't it, Gianluca? :D )
Immagine

gianlu-gianlu is working on it:
Immagine

Re: [GROUP BUY] Swing arm bearings/seals/pins KIT (with tools)

Inviato: mercoledì 12 dicembre 2012, 15:56
da elmosisu
Thanks for taking us in! I'll keep an eye out for updates.
apprezziamo il vostro aiuto!

Re: [GROUP BUY] Swing arm bearings/seals/pins KIT (with tools)

Inviato: mercoledì 12 dicembre 2012, 16:22
da brucaliffo
Hi elmo,
it's nice to see you here.
:welcome: in AOTR! :D

Re: [GROUP BUY] Swing arm bearings/seals/pins KIT (with tools)

Inviato: giovedì 13 dicembre 2012, 10:32
da the_toe_cutter
Hello lads,
Just a quick thanks to you Gianlu and Brucaliffo for supplying this kit, a great addition to my ongoing attempts at keeping my beloved Capo on the road! :D
Colum.

Re: [GROUP BUY] Swing arm bearings/seals/pins KIT (with tools)

Inviato: giovedì 13 dicembre 2012, 10:48
da brucaliffo
Hi Colum,
:welcome: on board :ok:

Re: [GROUP BUY] Swing arm bearings/seals/pins KIT (with tools)

Inviato: giovedì 13 dicembre 2012, 22:43
da Gianlu-Gianlu
Hello guys ..........
Do not worry, even if we are Italians AOTR us to carry out the commitments :giullare: :giullare: :giullare: :giullare: :giullare: .

I'll update as soon as news.

Re: [GROUP BUY] Swing arm bearings/seals/pins KIT (with tools)

Inviato: venerdì 14 dicembre 2012, 9:59
da brucaliffo
Immagine

Re: [GROUP BUY] Swing arm bearings/seals/pins KIT (with tools)

Inviato: venerdì 14 dicembre 2012, 11:36
da blumeeni1
I'm here...refugee from AF1
Great your doing these for us Guys thank's muchly
Blu

Re: [GROUP BUY] Swing arm bearings/seals/pins KIT (with tools)

Inviato: venerdì 14 dicembre 2012, 21:43
da Gianlu-Gianlu
Thanks guys, the only rule here in Aprilia On The Road is to introduce yourself and tell us a little about yourself, you can do so HERE

Re: [GROUP BUY] Swing arm bearings/seals/pins KIT (with tools)

Inviato: venerdì 14 dicembre 2012, 22:11
da Don Stanleybobly
Hi there,

another refugee from the AF1 Forum :evil:

arridiveci :tie:

Re: [GROUP BUY] Swing arm bearings/seals/pins KIT (with tools)

Inviato: venerdì 14 dicembre 2012, 22:17
da Gianlu-Gianlu
Who is the Australian among you?

Re: [GROUP BUY] Swing arm bearings/seals/pins KIT (with tools)

Inviato: mercoledì 19 dicembre 2012, 10:11
da Nerald
Hi, yet another from AF1. Just dropping in to say thanks for including us in this group buy. I changed my bearings out earlier this year but have put 8000 miles on them since then so thought I may as well have a set on the shelf for future use.
Thanks, your work is greatly appreciated.
Mark.

Re: [GROUP BUY] Swing arm bearings/seals/pins KIT (with tools)

Inviato: martedì 25 dicembre 2012, 21:08
da Pugwash
Hi All, yet another refugee from the AF1 forum who got in on your group buy for caponord swing arm bearings.
Many thanks for taking us in, I'm sure we all feel very welcome.

Merry xmas to you all.

Pugwash :banana:

Re: [GROUP BUY] Swing arm bearings/seals/pins KIT (with tools)

Inviato: martedì 25 dicembre 2012, 21:24
da Gianlu-Gianlu
Hello and welcome, this is a free forum, with few rules but clear.
Thank you for your trust, I will keep you informed with continuing the work.
When you have a moment of time presented HERE!